JOURNAL OF ADVANCED SCIENCE AND ENGINEERING RESEARCH
JASER is an open access journal, aims at rapid publication of concise research papers of a broad interest in science and engineering fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance. JASER welcomes papers and articles in science and engineering fields, including but not limited to the following:
- Biomedical Engineering
- Chemical and Environment
- Civil engineering
- Communication and Optics
- Industrial Engineering
- Manufacturing and Materials
- Mechanical engineering
- Oil and Gas
Microsoft Word format may be submitted online to Design for Scientific Renaissance for initial evaluation. For more information on submission process, authors should go to Submission page Style of manuscripts Authors should write their manuscripts based on the following format:
- Use only (Times New Roman) font 12 with 1.15 space for all sections within the article except the Abstract, it should be written in Times new Roman size 11. The article should be written in one column.
- The Document margins are 1 inch for left, right, top and bottom.
- Use APA 2011 for references and citations (www.apa.org)
- Paper title should be in the center, Bold, and size 16 in Arial. The authors name should be written in Arial font and size 14. Addresses and emails of the authors are in Arial font size 11.
- Do not use boldface typing except for section headings.
- Do not print page numbers.
- All manuscripts must be in English.
- When receiving the manuscript, we assume that the corresponding authors grant us the copyright to use the manuscript for the book or journal in question.
- The indentation of the first line after the first paragraph should be 0.25 inch for all sections.
- There should be no space between the paragraphs in the same section, and no spaces between the references.
Cover Letter All manuscripts should be submitted with a pre-defined cover letter. Authors may download a sample cover letter by clicking here.
Subdivision – numbered sections Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, …), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to “the text”. Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Abstract The abstract should conclude the research paper in (50-300) words. The abstract should state briefly the purpose of the research, the principal results and major conclusions. Write the abstract in Times new Roman, size 11.
Key words Use (3-6) words, these keywords will be used for indexing purposes. The font of the keywords is times new roman, size 11 and Bold.
Introduction State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Methodology Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Results & Discussion Results should be clear and concise. This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusion The main conclusions of the study may be presented in a short Conclusions section, which should stand alone.
Appendices If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Tables Tables (refer with: Table 1, Table 2) should be presented as part of the text. A descriptive title should be placed above each table. The caption should be self-contained and placed below or beside the table. Units in tables should be given in square brackets [cm²]. If square or standard brackets (cm²).
Figures Figures (refer with: Fig. 1, Fig. 2) and should be presented as part of the text, leaving enough space so that the capt¬ion will not be confused with the text. The caption should be self-contained and placed below the figure. Color figures are welcome for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.
Equations Equations (refer with: Eq. 1, Eq. 2. There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number
Literature References References are cited in the text just according to APA (name, year). The references are to be numbered in the alphabetic order and are to be listed at the end of the contribution under a heading References, see our example below.
Summary Please also provide your phone number, fax number and e mail address for rapid communication with the publisher. If you follow the foregoing, your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.
Al-Ahmari, A. M. A. (2007). Predictive machinability models for a selected hard material in turning operations. Journal of Material Process Technology. 190, 305–311.
Amiolemhen, E., and Ibhadode, A.O.A. (2004). Application of genetic algorithms determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile, International Journal of Machine Tools and Manufacture 44 (12 – 13), 1403 – 1412.
Astakhov, V. P. (2006). Tripology of metal cutting. Elesiver Ltd. Printed in Great Britain. pp. 425.
Campatelli, G. (2009, July). Analysis of the environmental impact for a turning operation of AISI 1040 steel. Innovative Production Machines and Systems (IPROMS2009) Conference, 6-17. ISO 3685, (1993). Tool life testing with single-point turning tools, International Standard organization, 2nd edition. Geneva, Switzerland
Checklist Before submission of your manuscript, please check that:
• All references cited in the text are included in the reference section.
• All figures and tables are cited in the text.
• Figures are at least 300 d.p.i.
• The pages are numbered.
Authors can download pdf file of Author Instructions from here.
If you need further information on APA format please refer to this Link
If you are interested to submit an article to PURE please register in the journal as Author, Login and start the five steps submission process.
Fees and Charges: Authors are required to pay a 200 USD handling fee. Authors may still request (in advance) that the editorial office waive some of the handling fee under special circumstances.
Editorial Board of JASER
Prof. Khalid Alkhateeb/ Malaysia.
Prof. Abdul Latif Ahmad/ Malaysia.
Prof. Almoataz Youssef Abdelaziz/ Egypt.
Prof. E. Fuad Kent/ Turkey.
Prof. Elbrous M. Jafarov/ Turkey.
Prof. Hossain U. Shekhar/ Bangladesh.
Prof. H. Mete Sen/ Turkey.
Prof. Ibrahim A. Ibrahim/ Egypt.
Prof. Imad F.T. Alshekhly/ Malaysia.
Prof. Muzhar M. Ibrahim/ Iraq.
Prof. Nadhir Al-Ansari/ Sweden.
Prof. Nawal Ezzat/ Iraq.
Prof. Reza S. Dariani/ Iran.
Prof. Saad Mekhilef/ Malaysia.
prof. Saied M.H. Darwish/ Saudi Arabia.
Prof. Talib S. Hussain/ Canada.
Prof. Usama S.A.R. Al-Timari/ Yemen.
A.Prof. Adel Aljumaily/ Australia.
A.Prof. Ahmmed S. Ibrahem/ Oman.
A.Prof. Jinan B.A. Al-Dabbagh/ Malaysia.
A.prof. Kyu H. Kim/ Korea.
A.Prof. Md Zaini Jamaludin/ Malaysia.
A.Prof. Mohammed Hayder Al-Mansoori/ Oman.
A.Prof. Mohammad Ismail/ Bangladesh.
A.Prof. Chowdhury Quamruzzaman/ Bangladesh.
A.Prof. Saba A. Ghani/ Iraq.
A.Prof. Yaarub Aldoori/ Malaysia.
A.Prof. Yogender P. Khasa/ India.
Dr. Mohamad A.M. Salleh/ Malaysia.
Dr. Muataz Hazza Faizi/ Malaysia.
Dr. Khalid M. Omar/ Malaysia.